Dustbane Emerald

Hard Surface Cleaner & Degreaser

Its safe yet powerful formula effectively cuts through grease, oil and heavily soiled surfaces. This biodegradable cleaner/degreaser is solvent free.

How To Use

For Hard Surface Cleaning

Dilute with unheated tap water according to the dilution rates listed on the label. Apply with a sprayer, sponge, mop or cloth.

Floor Deep Scrubbing

1. Prepare the Area: Remove all obstacles from the work zone, including walk-off mats. Place wet floor signs at every entrance to ensure safety.

2. Initial Cleaning: Dust mop the entire floor thoroughly. Remove any stuck-on debris such as gum, tape, or glue. Recommended product: Doodle Buster)

3. Dilute the Product: Mix Emerald Degreaser at a 1:40 dilution with unheated tap water.

4. Apply the Solution: Evenly apply the diluted solution to the work area. Allow it to dwell for 3–5 minutes to break down grease and soils effectively.

5. Scrub the Surface: Using a floor machine (175 RPM) or an auto scrubber equipped with a blue floor pad, scrub the area thoroughly.

6. Recover the Solution: Pick up the soiled solution using a wet vacuum or an auto scrubber.

7. Rinse the Floor: Rinse the entire area with cold water to remove any residual cleaner.

8. Detail the Area: Wipe down any adjacent surfaces that may have been splashed during the scrubbing process.

9. Dry and Inspect: Allow the floor to dry completely and inspect for a uniform, clean appearance.

10. Restrict Access: Keep all traffic off the cleaned area until the floor has been recoated with floor finish, if applicable.

Ready-to-use: Apply directly on surface or using a sponge or cloth. Wipe surface.

Recommended Dilution Rates

Hard Surfaces Cleaning	1:160
ECOLOGO (UL 2759)	1:128
Light Soil	1:120
Medium Soil	1:40
Heavy Soil	1:20
Floor Scrubbing	1:40

 

Where To Use

Suitable for floors, painted walls, woodwork, ceramic tile or metal.

SDS

Spec Sheet

Product Sheet

UL Certificate

CFIA Letter